| Home |  On-Line Order Form | Phone Orders 800-654-4998 Mon-Fri 10am-8pm Sat 10am-5pm EST  | Contact Us |

EXTREME WEATHER CARBURETOR VENT KITS Helps keep dirt out of your carburetor, while allowing proper venting and drainage. Will turn your motorcycle into a virtual submarine while also helping to prevent bogging while riding over rough terrain or whoops. By running the vent hoses as the diagram shows, you are allowing your bike to properly vent even if the lower hoses are submerged in water or clogged from gas due to whoops. Special Stainless Steel filters help keep out the dust in dry conditions, while the micro One-Way valves help keep water from traveling up the hoses in the wettest terrain. Kit comes complete with hoses, One-Way valves and Stainless Steel dust filters. $26.95

Note * FOR OFF-ROAD USE ONLY-  Tampering with EPA emissions devices on DOT approved motor vehicles may be a violation of State and Federal law. 

Diagram of proper hose routing. The two upper hoses should be run up under the gas tank. Never run them into the airbox. Under acceleration, vacuum within the airbox can interfere with proper carburetor operation. The lower hoses should be trimmed to hang just above the frame rails or skid plate. Do not loop the upper hoses down like the factory run hoses.

The lower hoses of the venting kit  are outfitted with special micro One-Way valves and Stainless Steel dust filters.

The upper hoses of the venting kit are outfitted with in-line Stainless Steel dust filters. These hoses should be run high, under the gas tank.

   

EMGO UNIVERSAL CRANK CASE VENT FILTER  $6.95

ROCKET IN-LINE CARBURETOR VENT HOSE FILTERS Helps protect your carburetor from the elements. Durable nylon construction resists gas and other chemicals. Stainless steel mesh filtration element. Small size easily fits in the tightest areas. Miniature size works perfectly on small carburetor vent hoses. Easy installation. Sold Each. $2.50

ONE-WAY CARBURETOR VENT HOSE CHECK VALVES Special miniature One-Way Check Valve will allow your carburetor to properly vent and drain as necessary, while helping to protect your carburetor and engine from water traveling up the vent lines. Place inline with the arrow pointing to the ground. Sold Each. $4.95

CARBURETOR VENT HOSE CLIPS The perfect clip for Extreme vent hose kits and carburetor vent lines. Just the right size for small hose used on most motorcycle carburetors. Slim style fits most carburetors. Sold in packs of 6 clips. See Below $2.95

CARBURETOR VENT HOSE CLIPS  Sold in packs of 6 clips. $2.95

NEW! STAINLESS STEEL GAS CAP VENT WITH ONE-WAY VALVE Now available in Stainless Steel, this gas cap vent is even better then before. Equipped with the latest in Micro One-Way Valves, it will help keep your tank vented properly. Slim design security clamp included. Gas cap NOT included. $8.95

MOOSE ONE-WAY GAS CAP VENT Available in cool new colors. Silver, Blue, Black, Red, and orange. Sold each. $9.95

LONG NO-SLOP GAS CAP VENT HOSE The internal one-way valve helps keep gas in your tank. Colors: Red, Blue, Black, Green, Clear, Yellow.$5.95

VENT HOSE WITH SPINNER AND CHECK VALVE With this the work has been done for you. Just replace your stock vent hose with this unit. Comes with vent house and spinner/check valve.$8.95

STANDARD GAS CAP VENT HOSE Looks great and helps keep your gas cap from falling to the ground. Colors: Red, Blue, Black, Green, Clear, Yellow.$1.95

MOOSE VENT HOSE SPINNER AND CHECK VALVE This little valve and swivel helps keep your vent hose from getting all twisted and also helps keep the gas from splashing out.$5.95

SUN LINE GAS STOP VALVE This little check valve goes in-line between your gas cap and the vent hose. Helps keep gas from coming out of the vent hose. Sold Each. $3.95

GAS CAP VENT HOSE CLIP Keeps your gas cap vent hose neatly out of the way and clipped to your cross bar. $2.95

CARBURETOR VENT HOSE This set of 3 vent hoses is long enough to fit any bike and can be cut to length. Fits all carburetors perfectly. Colors: Red, Blue, Black, Green, Clear, Yellow. $5.95

FUEL LINE OR DRINK HOSE T-FITTINGS Very high quality nylon low profile fittings for your fuel line or drink hose projects. Made in the USA, Color: Black, 4 per pack.
 3/16"

$2.50

 1/4"

$2.50

CARBURETOR VENT LINE T-FITTINGS Very high quality nylon low profile fittings for your carburetor vent line projects. Size: 1/8" Made in the USA, Color: Black, 5 per pack. $2.95

FUEL LINE OR DRINK HOSE CONNECTOR FITTINGS Very high quality nylon low profile fittings for your fuel line or drink hose projects. Size: 3/16" Made in the USA, Color: Black, 5 per pack. $2.50

MOOSE FUEL LINE CLIPS three popular sizes fits all dirt bikes. 15 clips per pack. $7.95

UNIVERSAL IN-LINE FUEL SHUT OFFS Designed to go in-line for universal applications Three sizes available. Sold each per fuel line inside diameter. $4.95

 3/16" Size

$11.95

 1/4" Size

$17.95

 1/4" THREADED shut off valve

$18.95

 5/16" Size

$14.95

TWIN AIR AIR FILTERS The choice of Champions. TwinAir has won more world championships then all other filters combined. Note* the outer shape of performance air filters sometimes differs from stock filters to maximize airflow inside the air box. This is done to increase performance and also because the performance filters are made from higher quality materials. Order by year, make and model of bike.

 Most models

$29.95

TWIN AIR OILING TUB Air tight lid keeps your filter oil fresh and clean. Makes oiling your filter easy and neat. $9.95

TWIN AIR CLEANING TUB Features a re-sealable lid and filter tray that allows the dirt to sink to the bottom away from your filter. $16.95

READYFILTER PRE-OILED AIR FILTERS Pre-oiled and sealed in a vacuum pouch, fully ready to install, comes complete with plastic gloves to keep your hands clean. And best of all at only $9.95, these filters are disposable. Why clean another air filter again! Order by year, make, and model of your bike. $9.95

HIFLO AIR FILTERS From the makers of the HiFlo Oil Filters come a new, more affordable air filter made in The Netherlands. These folks KNOW how to keep dirt out of their engines! Made from the finest materials and built to last. Available for most bikes. Order by year, make and model of bike. $19.95

UNI AIR FILTERS We carry Uni air filters to fit most late model 4-stroke bikes. Fit great and most come with metal air filter cage. $19.95-$32.95

UNI AIR FILTER FOAM MATERIAL  Great for making airfilters for older, out of production bikes. 12"x16"x5/8". $17.95

SPOKE , WHEEL, AND AIRBOX BRUSH  Reach hard to clean areas on your bike with ease. Natural fibers are easy on the finish.  $5.95

AIR BOX WASH COVERS Now you can really clean the inside of your air box without getting dirt and water inside your air boot. Custom fit for each model. Order by year, make, and model of your bike. $16.95-$26.95

K&N RECHARGER KIT Complete cleaning and oiling kit all in one. Designed specifically for K&N Air Filters. $14.95

MOOSE AIR FILTERS Now available for select 4-stroke bikes.
Honda CRF230

$23.95

Suzuki DRZ400 00-03

$21.95

Yamaha TTR125

$19.95

Yamaha TTR225

$16.95

Yamaha TTR250

$21.95

UNI FILTER UNIVERSAL CLAMP-ON AIR FILTERS High quality, clamp-on air filters have a heavy duty black rubber flange and come with a hose clamp. See chart for sizes and prices. More sizes available soon.

PT Number

ID In.

ID mm

L In.

L mm

 

UP4112

1"

28mm

3"

76mm

$15.95

UP4125

1 1/4"

32mm

3"

76mm

$15.95

UP4152

1 1/2"

38mm

4"

102mm

$15.95

UP4182

1 3/4"

44mm

4"

102mm

$15.95

UP4200

2"

51mm

4"

102mm

$15.95

UP4229

2 1/4"

57mm

4"

102mm

$15.95

UP4245

2 1/2"

63mm

4"

102mm

$15.95

UP4275

2 3/4"

70mm

4"

102mm

$15.95

PRO-SEAL CUSTOM SIZED AIRBOX GASKET   Designed specifically for your model bike, these airbox gaskets help keep out more dirt than plain grease. Helps seal irregular inner airbox surfaces. Larger sealing surface than just grease. No mess and easy airbox servicing. Order by year make and model of your bike. $16.95

PRO-SEAL '02 HONDA AIRBOX KIT   This kit comes with Pro-Seals unique airbox gasket to seal to help seal the gaps in the stock Honda airbox as well as an aluminum support ring to ad strength to the airbox.

Honda CR 125/250 '02-'04 Support Ring and Gasket kit $59.95
Honda CRF450 '02-04 Support Ring and Gasket kit $59.95

NO-TOIL AIR FILTER OIL Biodegradable air filter oil treatment. 16 oz. bottle.  $8.95

NO-TOIL AEROSOL AIR FILTER OIL Biodegradable spray-on air filter oil treatment. 12 oz. can.  $9.95

NO-TOIL AIR FILTER CLEANER Biodegradable concentrate that mixes with water. 16 oz. bottle.  $7.95

NO-TOIL AIR FILTER RIM GREASE Biodegradable, heat resistant, waterproof. 4 oz. tube.  $5.95

NO-TOIL FILTER MAINTENANCE KITS Kit includes cleaner, oil, and rim grease.

 Kit includes cleaner, 16 oz. oil, and rim grease.

$19.95

 Kit includes cleaner, 12 oz. aerosol oil, and rim grease

$24.95

ROCKET FILTER CLEANER A great new economical filter cleaner that dissolves oil, dirt, and grease quickly. Won't harm foam filter elements. Available in two sizes. The half Gallon size is just enough for minis and the big economical Gallon size is enough to service many filters.

 Half Gallon jug. $  9.95
 1 Gallon jug. $15.95

ROCKET DISPOSABLE FILTER CLEANING AND OILING GLOVES Protect your hands  from harsh chemicals while cleaning and oiling air filters. $.99

FILTER SKINS Clean your filter in seconds! Filter skins are a thin pre-filter that stretches over your air filter for extra protection. Washable and re-usable. 3 Filter Skins per pack. $14.95

AIR BOX FILTERED VENTS Allows more airflow to enter your air box. Filters help keep out dirt. 4 per pack. $6.95

VISU-FILTER Small clear body fits easily in-line on all bikes. Micro brass filter element. $2.95

90 DEGREE ANGLED FUEL FILTER Why didn't somebody think of this before! PERFECT for today's high performance race bikes with almost no room to spare and very short fuel lines. Fits all MX and Off-Road racing bikes. Sold EA.  $3.25

PANCAKE FUEL FILTER Made by Visu-filter, this unique shaped fuel filter takes up very little room in your fuel line. Available in 3/16" and 1/4" sizes. $2.95

X-LARGE FUEL FILTER Paper style filter element designed for high volume fuel lines. Fits both 1/4" and 5/16" fuel line. Filter body measures 2.25" long and 2" in diameter.  $3.95

FUEL LINE CLIPS
3/16" pack of 2 clips

$1.95

1/4"  pack of 2 clips

$1.95

5/16" pack of 2 clips

$1.95

RATIO RITE CUP Accurately measures oil and calculates oil/gas ratios quickly and easily.500cc/18oz. size. $4.50

RATIO RITE LID Snaps on to your Ratio Rite cup to keep out dirt and bugs. Your Ratio Rite is clean and ready to use each time. $2.95

BOYESEN SUPERSTOCK FIBER REEDS The original performing replacement fiber reed that last longer and cost less than any aftermarket reed available. Order by year, made and model of bike. $33.95

FUEL MIXTURE SCREW FOR 4 STROKE BIKES Replaces the very hard to reach stock mixture screw perfectly. Longer, with a large , knurled thumb screw this makes fine adjustments easy. No more fiddling with awkward screw drivers. Indexed with numbers so you can tell at a glance what your settings are. Order by year make and model of bike. $19.95

CARBURETOR MIXTURE SCREW O'RING Fits most motorcycle carburetor mixture screws. If yours is missing or worn it can leak air and cause poor engine performance. $1.95

MIKUNI HEX MAIN JETS Fits all Mikuni dirt bike carburetors. Specify size when ordering. $3.95

MIKUNI YZ PILOT JETS Fits Yamaha and Mikuni (TM) carburetors. Fits other models as well. Body has small stripe near the base. Specify size when ordering. $4.95

MIKUNI SMALL PILOT JETS Fits older style round (VM) slide carburetors. Specify size when ordering. $3.50

MIKUNI VM28/486 PILOT JETS Fits (RS) series carburetors. Specify size when ordering. $4.95

KEIHIN HEX MAIN JETS Fits KEIHIN dirt bike carburetors. Including the new Keihin FCR (Dirtbike) carburetor on the new CRF/X . Specify size when ordering. $5.95

KEIHIN PILOT JETS Fits KEIHIN dirt bike carburetors. Including the new Keihin FCR (Dirtbike) carburetor on the new CRF/X . Specify size when ordering. $5.95

MAIN JET WRENCH Fits all hex style main jets. Reduces distortion and over tightening. $4.95

NARROW HOSE CLAMPS At 9mm wide, these clamps are perfect for dirt bikes. Fit great on carburetors, radiator hoses, fork boots . High quality clamps wont come loose. Sold Each
  8mm - 12mm

$2.95

16mm - 25mm

$2.95

19mm - 28mm

$2.95

26mm - 38mm

$2.95

32mm - 44mm

$2.95

38mm - 50mm

$2.95

43mm - 57mm

$2.95

NARROW 9MM WIDE CARBURETOR & AIR-BOX HOSE CLAMPS Great for large diameter carburetors and intake and air-box boots. Smooth edges wont damage rubber flanges. Seals better then stock. Narrow profile replaces stock clamps perfectly. Sold ea.
 50mm - 70mm

$4.95

 70mm - 90mm

$4.95

NEOPRENE FUEL LINE Black Thick walled neoprene will not harden. Sold by the foot.
 1/4" diameter

$1.95

 5/16" diameter

$2.50

 3/8" diameter

$2.95

POLYURETHANE FUEL LINE Transparent blue color allows you to view fuel flow. Will not harden and withstands temperatures from -65o to 220o F. Sold/priced by the foot.
 1/6" diameter

$.95

 3/16" diameter

$.95

 1/4" diameter

$1.15

MOOSE FUEL LINE CLIPS three popular sizes fits all dirt bikes. 15 clips per pack. $7.95

FUEL LINE CLIPS
3/16" pack of 2 clips

$1.95

1/4"  pack of 2 clips

$1.95

5/16" pack of 2 clips

$1.95

FLOAT BOWL SCREWS Set of four high quality replacement screws and lock washers. $2.95

STA-BIL FUEL STABILIZER Keeps gas fresh while your bike is in storage for long periods of time. $6.95

TUFF JUG FAST FILL CAN Affordable, fast fill can for racing. Pours 5 gallons in 45 seconds!  $49.95

UTILITY JUG Space saving square design. Wide mouth sealed cap. Graduated markings. Comes with filler hose. $39.95