| Home |  On-Line Order Form | Phone Orders 800-654-4998 Mon-Fri 10am-8pm Sat 10am-5pm EST  | Contact Us |

ANSWER PRO TAPER CONTOUR HANDLEBARS Now a new taper wall aluminum handlebar is available from Answer. The Contour is made from Aerospace aluminum, knurled clutch side for secure grip hold, 1/4" cut guide lines for precise modification, high density molded foam pad included! Chemically applied "under sticker" graphics. Mounting kits sold below. $69.95

ANSWER PRO TAPER SE HANDLEBARS New from Answer these Pro Taper SE bars do not require any special mounting kits. They will fit any bike that has standard 7/8' type bars. They feature high-strength 2014-T6 aerospace aluminum alloy rated at 70,000 psi ultimate strength. Laser etched bar trimming marks if you need to make them narrower. Laser etched positioning guides and logos. Knurled left end. Shot peened finish to increase fatigue life. Full 5mm wall thickness for maximum strength. Cold forged crossbar. Stainless steel hardware. Available in CR, KX, RM, YZ, Mini styles. $59.95

MARSHALL RACING M-TAPERED BARS  High quality 1 1/8" diameter racing bars. Constructed from Aerospace grade, Heat treated 7075 T6 aluminum. Stronger and lighter then conventional aluminum bars. Controlled flex helps absorb shock and reduces rider fatigue. More resistant to bending. More precise steering. Color: Black. Available in: High, Low, Mid, Woods, Mini. Comes with black pad $49.95

MOOSE STEEL HANDLEBARS Standard bars will mount on your stock triple clamp. No special mounting kits are required. CR-Hi, CR-Lo, KX, RM, YZ, Mini, ATV-Hi. $19.95

MARSHALL RACING ALUMINUM BARS  High quality 7/8" diameter aluminum bars. Comes with bar pad.  Color: Black. Available in: Honda CR, Kawasaki KX, Suzuki RM, Yamaha YZ.  $39.95

ANSWER UNIVERSAL PRO TAPER MOUNTING KITS This kit will mount Pro Taper handlebars on any motorcycle. Comes with hardware. $39.95

ANSWER PRO TAPER RUBBER MOUNT KIT Designed for models with bolt-on handlebar clamps. Easily adapt ProTaper bars to your top triple clamp. Comes WITH hardware but does NOT come with pad. $39.95

ANSWER PRO TAPER MOUNTING BOLTS Genuine Answer Products replacement mounting bolts are easily replaced after a crash. Specify year, make and model of bike when ordering. Sold in pairs.$19.95

MOOSE UNIVERSAL HIGH RISE UNIVERSAL FAT BAR MOUNT KIT This kit contains the handle bar clamps and bar pad. Will adapt all Fat Bars/Protaper (1-1/8") to stock top triple clamps. Adds the extra height you need to be more comfortable.

High Rise +30mm ( aprox.1.25 inches ) Riser Set	$54.95
High Rise +50mm ( aprox. 2 inches ) Riser Set	$54.95

ANSWER HANDLEBAR SPACERS These aluminum spacers allow you to run standard 7/8" bars in any 1-1/8" bar clamps or risers. $21.95

ENDURO ENGINEERING KTM BAR RISERS Ads 5mm to 30mm of rise to the stock KTM bar mounts for a more comfortable riding position. Fits 00-09 models. $39.95

ANSWER PRO TAPER ROUND CROSSBAR PAD Replacement pad for the Pro Taper SE bars Available in Standard or mini. Colors: Black $12.95

ANSWER PRO TAPER MOUNT PAD Replacement pad covers the bar clamps mounts. Colors: Black $16.95

FLITE PRO TAPER STYLE BAR PADS New stylish color chrome graphics. Honda, Kawasaki, KTM, Suzuki, Yamaha designs. $18.95

FLITE MX X-BAR PADS New stylish color chrome graphics.

Mini Size 7.5"	$14.95
Full Size 10"	$14.95

FLITE SPEED SETS Crossbar pad and grip donut sets. Honda, Kawasaki, Suzuki, Yamaha. Available in Mini size (7.5") or full size (10")  $16.95

RENTHAL BAR PADS Available in full size or mini cycle.Red, Blue, Black, Orange, Yellow, Green. $19.95

MARSHALL BAR PADS New high tech foam padding with sleek, hi-gloss Velcro cover. Available in three sizes.

Mini Pad	$8.95
Full Size Pad	$8.95
ProTaper/Fatbar Style Pad	$14.95

MOTION PRO FORGED LEVERS  Quality 6061-T6 forged aluminum. Roller bearing in clutch pivot for effortless operation. Designed to fit OE perch. Order by year, make and model of bike $13.95 and up.

MOOSE SHORT CLUTCH LEVERS High quality aluminum levers are the same shape as stock levers except for the fact that they are about 1 inch shorter then stock. Perfect for use with bark Busters. No more need to cut the ball ends off your stock levers. Easier, cleaner, safer then a rough hacksaw end.

Order by Year, Make and Model of Bike.	$9.95
KTM With Hydralic Clutch	$19.95-$29.95

MSR AOF CLUTCH LEVER ASSEMBLY Universal application fitment and "adjust on-the-fly" style perch. Forged alloy construction for increased durability with a rubber boot to keep out dirt. Uses stock CR style lever. Bearing in pivot provides smooth lever feel and wear protection.

Standard Lever Assembly For 2-Stroke Bikes	$31.95
Lever Assembly With Hot Start Lever For 4-Stroke Bikes	$41.95

MSR PRO RAPTOR ADJUSTABLE CLUTCH LEVER ASSEMBLY Choose from 3 positions according to your clutch pull and riding style. Top position for increased cable pull. Middle position (same as standard lever assembly). Bottom position provides an easier pull with up to 325% less effort. Cable adjuster is anodized pivoting regulator, easy to adjust and helps eliminated cable drag in all positions. Vulcanized exclusive silicone rubber grip for improved control in all weather conditions. Needle bearing for free lever movement. Available is standard or short lever style.

Assembly For 2 Stroke Bikes STANDARD LENGTH LEVER	$49.95
Assembly For 2 Stroke Bikes SHORT LENGTH LEVER	$49.95
Assembly For 4 Stroke Bikes (Includes Hot Start Lever) STANDARD LENGTH LEVER	$55.95
Assembly For 4 Stroke Bikes (Includes Hot Start Lever) SHORT LENGTH LEVER	$55.95
Replacement Cable Adjuster For Raptor Lever Assemblies	$  8.95

MOOSE OEM 4-STROKE LEVER ASSEMBLIES OEM replica lever, perch, and hot starts in cast aluminum. The same design as your OEM assembly with slightly shorter levers. Hot start locations, cable adjusters and pull ratios all match your OEM setup. Real Bronze bushings for smooth lever action. Order by year, make and model of 4-stroke bike. $34.95

MOOSE ULTIMATE CLUTCH LEVER SYSTEM Clutch lever has two cable locating positions for easier leverage. Constructed of polished cast aluminum alloy. Removable rubber guard keeps mechanisms clean and operational. Nylon sleeve perch insert allows perch to rotate during impact. Pivoting cable adjuster allows easy cable tension adjustments. Needle bearing lever. Lever angle adjuster

For 2-Stroke Bikes	$44.95
For 4-Stroke Bikes	$53.95

MOOSE COMPETITION LEVER SETS High quality cast aluminum levers designed aprox. 1" shorter then stock levers to fit behind bark busters. Traction pads improve feel in slippery conditions. Order by year, make, and model of bike. $26.95

MIRROR MOUNT CLUTCH PERCH CLAMP HALF CNC machined 6061 T6 aluminum. Add a mirror to your OEM clutch perch. 10mm threads fit most mirrors. Save space on your handlebars with this clean setup. Universal for OEM clutch perches (Not for hydraulic clutches) $15.95

SPLIT MIRROR CLAMP Allows easy installation on any handlebar. Accepts any 10mm threaded mirror. $8.95

MSR DOMINATOR CLUTCH BRACKETS High quality precision machined aluminum alloy. Quick removal split perch design. Available for most bikes. Order by year, make and model. $9.95-$19.95

MSR LEVER BRACKET REPLACEMENT PIVOT BOLT High quality replacement clutch pivot bolt and lock nut.

Order by Year, Make and Model of Bike.

$1.95

UNIVERSAL STAR CABLE ADJUSTER Replacement cable adjuster fits most bikes. Made from high quality aluminum alloy. $3.95

MSR YZ STAR ADJUSTER Replacement star adjuster for the MSR YZ perch. Also fits the stock 00-02 YZ original perch.$9.95

MSR HOT START CLUTCH LEVER BRACKETS High quality direct replacement parts engineered to the exact specifications as the stock items. Uses stock clutch levers (and hot start levers on models not sold with hot start lever). Actual perch will be just like stock and may vary from perch shown  they vary from make to make.

CLUTCH PERCH WITH HOT START LEVER (NO CLUTCH LEVER)
Order by Year, Make and Model of Bike.	$33.95
REPLACEMENT HOT START (LEVER ONLY)
Order by Year, Make and Model of Bike.	$6.95
CLUTCH PERCH WITHOUT HOT START LEVER (NO CLUTCH LEVER)
Order by Year, Make and Model of Bike.	$28.95

Perch shown with Hot Start lever.

KTM HYDRAULIC CLUTCH LEVER High quality aluminum alloy clutch lever fits KTM's with hydraulic clutches. Order by year and model. $19.95-24.95.95

KTM BRAKE LEVER High quality aluminum alloy lever fits. Order by year and model. $8.95-$14.95

BLACK CLUTCH LEVER High quality aluminum. Standard length. Available for most  newer model bikes. Order by year, make and model.  $7.95

BLACK BRAKE LEVER High quality aluminum. Standard length. Available for most  newer model bikes. Order by year, make and model.  $8.95

BLACK CLUTCH LEVER BRACKET High quality aluminum. Comes with adjuster and pivot bolt. Available for most  newer model bikes. Order by year, make and model.  $8.95

UNIVERSAL BLACK LEVER ASSEMBLY High quality aluminum lever and perch assembly. Ready to mount and use. Great for that restoration project, or a cheaper alternative for your basic control needs.

Honda CR style CLUTCH lever & perch assembly	$12.95
Honda CR style BRAKE lever & perch assembly	$12.95
Kawasaki, Suzuki, Yamaha (Early Style) CLUTCH lever & perch assembly	$12.95
Kawasaki, Suzuki, Yamaha (Early Style) BRAKE lever & perch assembly	$12.95

UNIVERSAL POLISHED LEVER ASSEMBLY Same as above in a polished aluminum finish.

Honda CR style CLUTCH lever & perch assembly	$12.95
Honda CR style BRAKE lever & perch assembly	$12.95
Kawasaki, Suzuki, Yamaha (Early Style) CLUTCH lever & perch assembly	$12.95
Kawasaki, Suzuki, Yamaha (Early Style) BRAKE lever & perch assembly	$12.95

PRO GRIP LEVER GRIPS Helps to increase control even when your levers are wet and covered in slippery mud. Easy to install , sold in pairs only. $4.95

CABLE ADJUSTER Aluminum cable adjuster works on most stock and aftermarket clutch brackets for Japanese bikes. $2.95

CLUTCH LEVER PIVOT BOLT High quality pivot bolt fits stock and most aftermarket clutch brackets (except Dominator).

RUBBER LEVER COVER Aluminum cable adjuster works on most stock and aftermarket clutch brackets for Japanese bikes. $4.95

MOTION PRO CABLES Smooth working, great fitting and heavy duty construction are just a few of the features and advantages these cables have over stock cables. Not to mention a great price! Available for most bikes. Order by year, make, and model of your bike. Prices for cables starting at  $12.95

MOTION PRO HOT START CABLES Now available for 4-stroke bikes. High quality, replacement hot start cables.

CRF 04-06	$16.95
RMZ450	$23.95
YZF 03-05	$11.95
YZF 06	$23.95

MOTION PRO SPEEDO CABLES Heavy duty speedo cables feature metal threaded ends and durable casings. Come complete with inner drive wire.  Available for most enduro and dual sport bikes. Order by year, make, and model of your bike. Prices for cables starting at  $11.95-$19.95

ENDURO ENGINEERING/MOTION PRO KTM LONGER THEN STOCK THROTTLE CABLES These cables are 3 inches longer then stock. Provides a better fit when changing handlebars or installing brush guards.

MOTION PRO TERMINATOR CLUTCH CABLES OLDER FOR KTM Is your bike one of those bikes with hard to pull in clutches? Some Euro bikes especially have tough clutches. Terminator cables will help reduce the effort needed to pull in your clutch.  Order by year, make, and model of your bike. $22.95-$29.95

UNIVERSAL BRAKE & CLUTCH CABLES Great for that old bike project or custom applications. These heavy duty, high quality brake or clutch cables can be made to work on many older bike where replacement cables are no longer available. 60" long.  $8.95

ENDURO ENGINEERING KTM CLUTCH HOSES High quality braided stainless steel hoses are stronger and more durable then stock hoses.

BRAKE HOSE SAVER Easily slips over your brake hose to protect it from wear. Can be cut to length and used on front or rear brake hoses. Large enough to also fit over odometer/computer sensor pick up wire. $8.95

HYDRAULIC CLUTCH BLEEDER KIT Made by Magura, this kit will help you bleed those tricky KTM (or any hydraulic) clutch. Kit comes complete with bleeder, adapters, hose and bottle of mineral hydraulic clutch oil.

Hydraulic Clutch Bleeding Kit	$25.95
Magura Hydraulic Clutch Oil 2oz. Bottle	$  4.95

MOTION PRO SPEEDO CABLE REPAIR KIT  Universal repair kit comes with the inner drive wire and several ends and crimp tool.  $16.95

CABLE LUBER Clamps to the end of your cable and makes squirting lube in your cables easy and mess free. $7.95

CABLE LIFE CABLE LUBE Won't harm modern cables like some household lubes can do. $5.95

MOTION PRO CABLE LUBE Specially formulated by Motion Pro to make your cables work smooth and your clutch easier to pull in. $15.95

MOTION PRO CR TYPE THROTTLE Great replacement throttle for Honda Cr's. Works with stock cable. CR Mini $19.95 CR Full size bikes $22.95

TMV GASSER THROTTLE FOR CRF250/450 Replacement two cable throttle. $29.95

DOMINO THROTTLES FOR KTM & HUSKY Replacement throttle assemblies for KTM & Husky 2 stroke & 4 stroke motorcycles 2 Stroke (single cable model) $62.95 4 Stroke (dual cable model) $52.95

MOTION PRO VORTEX THROTTLE Cast aluminum body with smooth working throttle tube. Complete and ready to go at a fraction of the cost of stock throttles.

UNIVERSAL THROTTLE Just what it says, UNIVERSAL so if you have a vintage project in the works and your the "handy" type, this is a great throttle for you. $19.95

UNIVERSAL THROTTLE AND CABLE KIT This kit includes a Honda CR style  throttle and cable. $29.95

UNIVERSAL 48" THROTTLE CABLE Universal replacement cable for the above throttle and cable kit. $13.95

MOTION PRO THROTTLE TUBES Fits your stock throttle perfectly. Made of a strong nylon composite material with "pop-out" ends for easy Bark Buster installation. Order by year, make, and model of your bike. $9.95

ALUMINUM THROTTLE TUBES The ultimate throttle accessory. Super high quality precision machined. Teflon coated just like the factory teams. Order by year, make, and model of your bike. $49.95

LEVER KEY CHAIN Mini aluminum key chain. $2.95

CR STYLE KILL BUTTON Replaces the stock CR kill button. Rubber boot helps keep out water. Two wire installation. $10.95

KX STYLE KILL BUTTON Replaces the stock KX kill button. Rubber boot helps keep out water. Two wire installation. $14.95

RM STYLE KILL BUTTON Replaces the stock CRM kill button. Two wire installation. $12.95

YZ STYLE KILL BUTTON Replaces the stock CR kill button. Two wire installation. $11.95

UNIVERSAL KILL BUTTON Can be used as a kill button or horn button. Aluminum body with one wire installation. $11.95

SNOW MOBLIE STYLE KILL BUTTON Stays off when pressed. Rubber boot to keep out water. Two wire installation. $12.95

ATV KILL BUTTON Sometimes called a "dead mans switch" It will kill the engine if the rider and machine get separated Open circuit style- $19.95 Closed circuit style- $19.95

ALUMINUM SHIFT LEVERS
Forged from high quality aluminum. Tougher than stock and a lot less expensive. Fits exactly like o.e.m. part. Order by year, make, and model of bike. $25.95             New! CRF 50/70 +1" shift lever $25.95

STEEL FOLDING SHIFT LEVER Feature spring loaded folding ends to help protect your shift shaft from damage. Strong steel construction. Available for most dirt bikes. Order by year, make and model of bike. $30.95

SHIFT LEVER RUBBER Replacement shift lever rubber for folding steel shift levers. $1.95

UNIVERSAL STEEL FOLDING SHIFT LEVER TIP Great for project bikes. Can be welded to steel shift levers or bolt on aluminum levers. Comes with shift lever rubber . $14.95

UNIVERSAL STEEL FOLDING BRAKE LEVER TIP Fix that very expensive brake lever and save yourself money. Can be welded on steel brake levers or bolted on aluminum brake arms. $14.95

IMS PRO SERIES FOOT PEGS Extra wide profile for comfort and stability. High quality construction and aggressive teeth add up to one of the best foot pegs available for racing in tough, demanding conditions. $95.95

MOOSE STAINLESS STEEL FOOT PEGS Each foot peg is cast from 17-4 stainless steel, given a solution annealing treatment and age hardened for superior strength. Wide (55mm), slightly convex platform for better boot positioning and grip when leaning forward or back. Designed without cross braces allowing mud and debris to clear easily. Available with 1/2" rear offset to make more space for taller riders. Made in USA $79.95

ROUND PASSENGER PEGS Universal designed, traditional round style folding passenger pegs. Sold in pairs only.

With 10mm mounting stud	$9.95
With 12mm mounting stud	$12.95

SQUARE PASSENGER PEGS Universal folding design. Sold in pairs only. $7.95

ODI MX GRIPS Comfortable, long lasting MX grips are available in Black, Red, Blue, Green, and Pink. $8.95

ODI MUSHROOM GRIPS A classic comfortable off-road grip. Available in Black. $10.95

MOOSE STEALTH GRIPS Comfortable half smooth and half waffled design. Available in Black, Orange, Red, Blue. $7.95

MSR Z-PATTERN GRIPS Dual compound construction with both firm and soft Krafton rubber compounds. Outer compound provided ultra tacky feel and grip in all conditions. Inner compound provides excellent shock absorption and durability. Unique inner casing lends a superior bonding interface between handlebar and grip. Color: Black, Blue, Red. $9.95

MSR HALF WAFFLE GRIPS Dual compound construction with both firm and soft Krafton rubber compounds. Outer compound provided ultra tacky feel and grip in all conditions. Inner compound provides excellent shock absorption and durability. Unique inner casing lends a superior bonding interface between handlebar and grip. Color: Black, Blue, Red. $9.95

MSR FULL DIAMOND GRIPS Dual compound construction with both firm and soft Krafton rubber compounds. Outer compound provided ultra tacky feel and grip in all conditions. Inner compound provides excellent shock absorption and durability. Unique inner casing lends a superior bonding interface between handlebar and grip. Color: Black, Blue, Red. $9.95

ANSWER PILLOW TOP GRIPS The latest technology in grip control. Super comfortable design with durable traction pillows. Wicked comfortable grips! Available in Grey/Black, All Black $12.95

ANSWER PROTAPER  SYNERGY DUAL DENSITY COMPOUND HALF WAFFLE GRIPS Constructed of both firm and soft Kraton rubber compounds. Outer casing provides long lasting wear against tearing. The inner casing provides excellent tackiness and shock absorption. $12.95

ANSWER PROTAPER  SYNERGY DUAL DENSITY COMPOUND GRIPS Constructed of both firm and soft Kraton rubber compounds. Outer casing provides long lasting wear against tearing. The inner casing provides excellent tackiness and shock absorption. $12.95

ANSWER PROTAPER  ALL DIAMOND THIN GRIPS Constructed of of strong, yet thin diamond pattern grips. Perfect for riders that like thin grips. $9.95

ANSWER PROTAPER  SKULLCANDY GRIPS Answer Protaper grips with the famous SkullCandy logo. $12.95

FOUR-TWELVE MINI GRIPS GRIPS Designed specifically for the 50cc pit bikes. Small size for small controls. $11.95

SCOTT HURRICANE GRIPS All over waffle pattern with safety wire grooves. Colors: Black, Gray, Blue, Red, Green, Yellow. $8.95

PRO GRIP #714 RALLY GRIPS A larger diameter grip for people with large hands. Extra cushion helps dampen vibration on extended rides.  Colors: Black $11.95

RENTHAL KEVLAR GRIPS Renthal has developed a special Kevlar reinforced grip, with all the properties you would expect from a Renthal Grip, with the added life extending properties of Kevlar. Softer, tackier and longer lasting. Used and endorsed by Mike Alessi, Nathan Ramsey, and Ryan Hughes. Through rigorous testing, Renthal has found that this revolutionary combination of Kevlar and their softest compound ever, have resulted in a grip that lasts three times longer than any soft grip currently on the market today. $19.95

RENTHAL FULL WAFFLE GRIPS Waffled all over pattern for extra grip in muddy conditions. Available in three compounds. Color: Gray

RENTHAL ALL DIAMOND GRIPS For racers who prefer a slim grip with slight textured surface. Available in three compounds. Color: Gray

RENTHAL HALF WAFFLE GRIPS Half waffle and half smooth pattern for comfort. Available in three compounds. Color: Gray

RENTHAL DUAL COMPOUND GRIPS Half waffle and half smooth pattern for comfort. Durable firm compound base with the comfort of the soft gripping surface. Color: Gray/Black $16.95

RENTHAL DIAMOND DUAL COMPOUND GRIPS New textured design for added comfort and control. Durable firm compound base with the comfort of the soft gripping surface. Color: Gray/Black $16.95

OURY GRIPS The classic off-road grip. First introduced in the early 70's, this grip has been a favorite of racers for years because of its soft and comfortable rubber compound. Color: Black

Motorcycle Grips	$8.95
ATV, Watercraft, MTB Grips	$10.95

GALINDO OPEN-END ENDURO GRIPS durable rubber compound lasts and lasts. Open ends make installing brush guards quick and easy. Black only . $9.95

MOTION PRO GRIP END PUNCH Clean cut every time. Durable steel construction. Perfect for installing hand guards. Kit includes 6 in. extension, 1 in. cutter and 7/8 in. cutter. $23.95

ODI GRIP DONUTS  Color: Black, Red, Blue.  $2.95

MOOSE GRIP DONUTS Extra thick to fill those gaps between your throttle housing and grip flange.  Sold in pairs. Color: Black/Red.  $2.95

NEW! FX GRIP DONUTS New Team  Grip Donuts by Factory Efx. Help prevent blisters. Improves comfort and control. Easily slips over any grips.  Honda, Kawasaki, Suzuki, Yamaha. Sold in pairs.  $4.95

SCOTT GRIP STICK Specially formulated by Scott. Bonds securely and quickly. Small single use tube wont go hard between uses. $1.95

PROTAPER GRIP GLUE Designed specifically by Protaper for their grips. STRONG STUFF! $7.99

THREE BOND GRIP LOCK By the same people who have been making motorcycle sealers and adhesives for years and years. $5.95

RENTHAL GRIP GLUE The only grip glue recommended for Renthal grips. Large 25ml tube. $7.95

GRIP SAFETY WIRE 25 FOOT ROLL A must for every tool box. This is the real stuff. Not a cheap imitation. Made from .032" stainless, this wire twists tight without breaking. Perfect for grips or your general safety wire needs. 25 foot roll. $7.95

GRIP SAFETY WIRE 6 FOOT ROLL  Made from .032" stainless, this wire twists tight without breaking. Small 6 foot roll is just enough to do a pair of grips. $3.95

SAFETY WIRE QUARTER POUND SPOOL Got A LOT of grips to wire? This mega size quarter pound spool is for you. Same great quality .032" stainless steel wire. $11.95

SAFETY WIRE PLIERS Quickly and easily spins your safety wire evenly and neatly. $19.95

MOOSE RACING GRIP HEATER KIT Extend your riding season with the Moose Racing hand warmer kit. This kit allows the heating elements to be fitted neatly and discretely under the original or aftermarket grips. Easy to install, with 2 stage heat settings, this kit is suitable for all types of bikes. Kit includes throttle heater, clutch heater, round rocker switch, hardware, plastic tie straps, and instructions.

ATV grip heater kit	$39.95
Motorcycle grip heater kit	$49.95

GRIP HEATERS Keep your hands warm with these unique grip heaters. Self adhesive elements easily fit under your favorite grips. Comes with a 3-way switch for temperature control. Easy to follow instructions. Your bike must have a lighting coil /headlight to use these.

HOW TO WIRE YOUR GRIP HEATERS

MOOSE GRIP SAVER BAR ENDS For aluminum handlebars. Helps protect the ends of the grips from crash damage. Taper lock design stays tight and comes apart quickly when needed. $14.95

MOOSE GRIP SAVER BAR ENDS For steel handlebars. Helps protect the ends of the grips from crash damage. Taper lock design stays tight and comes apart quickly when needed. $14.95